www.zippity-outdoor.com
6
STEP 4 (OPTIONAL): SECURE POSTS TO PIPE ANCHOR
1. Drive a ¾” - 1
¼
” self-drilling hex head
tek screw (NOT INCLUDED) through the
post until it meets the pipe anchor.
2. Remove the vinyl burrs from the post
and screw.
3. Slowly drive the screw with force into
the pipe anchor.
Step 4 is only to be completed if you are concerned that someone may pull your fence posts out of
the ground.
1. Use a level to straighten the post.
2. Drive a second hex head tek screw into the top of the post using the same pro-
cess shown in step 4.1.
Note: Remove vinyl burrs
with pliers if necessary.
Adjust until level.
Note: Ensure the screw is
driven into the center of the
pipe.
Top view
STEP 4.1
STEP 4.2
1
1
2
2
3