![Zippie Simba Скачать руководство пользователя страница 16](http://html2.mh-extra.com/html/zippie/simba/simba_directions-for-use-manual_3828420016.webp)
CAUTION!
Braking power can be affected by incorrect fitting and adjustment of
the brakes, as well as tyre pressure which is too low.
Wheel locks
Your wheelchair is equipped with two wheel locks. They are applied
directly against the tyres. To engage, press both wheel lock levers
forward against the stops. To release the wheel lock, pull the levers
back to their original positions.
Braking power will decrease with:
•
Worn tyre tread
•
Tyre pressure that is too low
•
Wet tyres
•
Improperly adjusted wheel locks.
The wheel locks have not been designed to be used as brakes for a
moving wheelchair. The wheel locks should therefore never be used
to brake a moving wheelchair. Always use the handrims for braking.
Make sure that the interval between the tyres and wheel locks
complies with the given specifications. To readjust, loosen screw (1)
and set the appropriate interval. Tighten screws again (see the page
on torque) (Fig.5.2).
Standard Wheel lock
(Fig.5.3)
4.0 Handling
Brakes
Quick-release axles on rear wheel
The rear wheels are equipped with quick-release axles.
The wheels can thus be installed or removed without using tools.
To remove a wheel, simply depress the quick-release button on the
axle (1) and pull it out (Fig.3).
CAUTION!
Hold the quick-release button on the axle depressed when inserting
the axle into the frame to mount the rear wheels.
Release the button to lock the wheel in place. The quick-release
button should snap back to its original position.
Transporting the chair
Removing the rear wheels will keep the chair as compact as possible.
The backrest can be folded down by pulling the cord located on the
backrest.
Step Tubes
Step Tubes
Step tubes are used by attendants to push a wheelchair over an
obstacle. Simply step on the tube to push a wheelchair, for example,
over a kerb or step (Fig. 5.1).
Fig.5.1
Fig. 5.3
5.0 Options
3 mm
1
Fig. 5.2
Fig. 4.0
1
16
ENGLISH
Rev.5.0
Simba
Содержание Simba
Страница 6: ...M5 5 0 Nm M6 7 0 Nm M8 10 0 Nm Nm...
Страница 209: ......
Страница 210: ......
Страница 211: ......