ZIPPIE SALSA R
2
/ ZIPPIE SALSA M
2
59
Rev.2.0
12.4 Crash testing on the Zippie Salsa, all models.
A representative Zippie Salsa R2 & Zippie Salsa M2
wheelchair has been tested in accordance with the
dynamic performance requirements specified in ISO
7176-19:2001 “Wheeled Mobility Devices for use in Motor
Vehicles” using a Q straint 6 point strap restraint system
with double straps at the rear which conform to ISO 10542
or SAE J2249 and was used in accordance with the
WTORS manufacturer’s instructions.
The Q straint restraint system was used for these tests.
However other restraint systems can be used as long as
they conform to ISO 10542 or SAE J2249 and are used in
accordance with the WTORS manufacturer’s instructions.
They must also be checked to make sure that they are
sufficiently specified for the weight of the wheelchair and
rider
WARNINGS!
• All restraint systems must conform to ISO 10542 or
SAE J2249.
• All restraint systems must be used in accordance with
the WTORS manufacturer’s instructions.
• All restraint systems must be checked to make sure
that they are sufficiently specified for the weight of the
wheelchair and rider
12.5 The tie down label and placement
The label shown in Fig 12.6
is used to identify the tie
down points on all chair models.
Fig. 12.7 - 12.10 show the tie down label placements on
the Zippie Salsa R2 & Zippie Salsa M2.
Fig.12.6
Fig.12.7
Fig.12.9
Fig.12.10
Fig.12.8
