Zippie Neptune 2, Инструкция по применению, Страница: 25 / 36

ENGLISH
25 Neptune 2 Rev.1.0
25.0 Tilt In Space (Multi Height & Tilt Base)
WARNING!
Always ensure the base is stable and that the brakes are applied
before performing the following adjustments.
• Release the locking mechanism on the handle by squeezing the
small latch (A) up on the handle.
• To Recline: Use one hand to squeeze handle (B) and push
down the chair handle, at the same time use the other hand
positioned on the chair arm or side to help guide the chair into
the recline position.
• To put into Prone: Squeeze handle (B) and pull the chair
handle upwards and forwards. At the same time use the other
hand positioned on the chair arm or side to help guide the chair
into the prone position.
• Once in position release handle (B) to lock the tilt mechanism.
• Ensure that the latch (A) on the handle moves back into a
closed position, this ensures the tilt position is locked in place.
Fig.25.2
Fig.25.1
Fig.25.3
B
A
A
WARNING!
The operator should control the motion of the chair while the
squeeze handle is engaged. The amount of support required will
vary with the size and weight of the user. We recommend practicing
this operation on first use before placing the client in the chair.
24.0 Height Adjustment Standard Base
WARNING!
Always ensure the base is stable and that the brakes are
applied before performing the following adjustments.
To Raise The Chair
Located at the back of the chair beneath the base locate the
handle (A) and continuously push down to raise the height.
The seat height will raise with additional assistance required,
dependent upon the weight of the user.
Release the handle when the desired Height is achieved.
To Lower The Chair
Use the handle (A) again but this time apply pressure to the top
of the seat with one hand whilst pushing down handle (A).
CAUTION!
If you find performing these actions difficult to do simultaneously
on your own please get another person to help you.
Fig.24.1
A