
ZIPPER MASCHINEN GmbH
Strana 33
Motorová kosa / brush cutter ZI-MOS 4T
Seite 33
A C H T U N G
Fill with oil (SF 15W40) untill the
mark!
15.4
Start
Assure yourself prior to every start that the fuel-oil
mixture is shook up well. Do not use self –mixed mix-
tures older than one month..
Check all machine parts for condition and all connec-
tions for tight set.
Put the main switch
G
into position I.
Apply the choker by putting lever
J
into upper position.
The choker is used for starting the machine when it is cold.
Then press 2-3 times the primer pump (28).
You find the primer between fuel tank and carburetor-bottom.
Now start the engine puy pulling the starter
K
out briskly.
When the machine has started, shut the choker J off again.
Let the machine run for one minute in idle run.
TO STOP THE MACHINE IT IS ENOUGH TO PUT THE
MAIN SWITCH G INTO POSITON O (=STOP)
15.5
Refuel
Use petrol with 95 octan.
15.6
Throttle control
Press
N
.
Now you can press throttle lever
O
.
You can switch into continuous operation by
pressing
P
.
G
J
P
N
J
K
O