ASSEMBLY
35
ZI-KGS210DS
1.
Assembly mitre lock
•
Screw the mitre lock (1) into the bore hole on the rotary
table (2).
2.
Assembly workpiece support
•
Attach the two workpiece supports (1) to the left and
right of the fixed table of the machine.
•
Use in each case two hexagon socket screws (2) and the
Allen key 6 mm (3).
3.
Fasten the sawdust bag
•
Press the metal ring (2) of the sawdust bag (1) together
and slide it over the chip collection outlet.
•
After releasing the metal ring (2), the sawdust bag is
fixed to the machine.
4.
Assembly downholder
•
The downholder (1) can be placed to the left or right of
the saw blade.
•
To do this, place the downholder (1) in the hole (2) on the
machine.
14.3
Electrical connection
WARN IN G
Dangerous electrical voltage!
The machine may only be connected to the mains supply and the associated
checks carried out by a qualified electrician or under the instruction and supervision
of a qualified electrician!
•
Check, whether the neutral connection and the protective grounding function properly.
•
Check, whether the supply voltage and the frequency correspond to the specifications of the
machine.
