OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Seite 18
HAND-DRUCKSPRÜHER / PRESSURE SPRAYER ZI-HDS 8L
ite 18
3.
Build up pressure:
Draw the handle out of the groove, and inflate
evenly to add more pressure to the tank. (The
switch here must be turned off). When the
pressure increases, the equipment is ready for
sprinkling by holding the switch handle. You
may choose spot spray, or continuous spray,
and you can regulate the spray nozzle to
improve the quality of atomization depending
on the requirements of different crops.
4.
Switch control:
Spotspraying:
Push the switch for the time
to spray.
Continual spraying:
Press the Switch and
slide the lock forward. Slide back again to turn
off.
5.
Safety valve:
If pressure exists in the tank, release it before
removing the air cylinder. You may press the
switch plate or pull the valve stem of the
safety valve to release pressure
.
6.
Adjust the spraying head:
By rotating the spraying head the spray is
changed
