MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
40
ZI-DRM51
15.8
Spark Plug
Once the engine has cooled, remove the spark plug
using the box spanner supplied, clean the plug with a
wire brush. Using a feeler gauge, set the gap to 0.75
mm (0.030"). Refit the spark plug taking care not to
overtighten.
15.9
Cleaning
Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
Clean the machine housing with a wet cloth and a mild cleaning solution.
Put on all coatless flats a thin coat of oil.
NOTICE
The usage of solvents, aggressive chemicals or scouring agents damages the
machine housing.
15.10
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old
NOTICE
Please note that a return should always be in the original packaging. By
this measure, accidental damage and their often contentious regulation are
effectively avoided. Only in the original box your device is optimally
protected and thus secured a smooth machining
.
