Zipper Mowers ZI-COM50-10, Руководство пользователя, Страница: 24 / 33

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  24
ZI-COM50-10
17 TROUBLE SHOOTING
Disconnect the machine from the power supply prior to any checks performed at the machine
itself!
Trouble Possible cause Solution
Pressure can no
longer be stored
 Valve seals broken  Replace the seals
Compressor runs
but produces no
pressure  Defective seals
 Defective valves
 Replace the seals
 Replace the valves
Engine will not start
 No power supply  Check the connection to an existing
electrical grid.
After reaching the
escapes cut-off
pressure
Compressed air
through the relief
valve und Pressure
switch to reach the
starting pressure
 Leaking or defective check valve
 Check valve is damaged
 Clean or replace check valve insert
 Replace check valve
Compressor on
frequently
 Very much condensate in the
pressure boiler
 Overload compressor
 Drain condensate
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION
TO THE ELECTRICITY GRID.
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the problem.