SAFETY
24
ZI-ZSM600
12
SAFETY
This section contains information and important notes on the safe commissioning and handling of the
machine.
For your safety, read this manual carefully before commissioning. This will enable you to
handle the machine safely and thus prevent misunderstandings as well as personal injury
and damage to property. Pay special attention to the symbols and pictograms used on the
machine as well as the safety information and danger warnings!
12.1
Intended use of the machine
The machine is intended exclusively for the following activities:
For wet cutting of cellular concrete blocks, bricks and concrete blocks within technical limits.
N OTE
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use be-
yond this and for any resulting damage to property or injury.
12.1.1
Technical Restrictions
The machine is designed for the work under the following conditions:
Relative humidity:
max. 70 %
Temperature (for operation):
+5° C to +40° C
Temperature (Storage, Transport):
-20° C to +50° C
12.1.2
Prohibited applications / Dangerous misuse
•
Operating the machine without adequate physical and mental fitness.
•
Operating the machine without knowledge of the manual.
•
Modifying the machine design.
•
Operating the machine outside the technical limits specified in this manual.
•
Removing of the safety markings attached to the machine.
•
Modifying, circumventing or disabling the safety devices of the machine.
The non-intended use or the disregard of the explanations and instructions described in this manual will
result in the expiration of all warranty claims and compensation claims for damages against ZIPPER
MASCHINEN GmbH.
12.2
User Requirements
The machine is designed to be operated by one person. The prerequisites for operating the machine are
physical and mental fitness as well as knowledge and understanding of the operating instructions.
Persons who, due to their physical, sensory or mental capabilities, inexperience or lack of knowledge, are
unable to operate the machine safely must not use the machine without supervision or instruction by a
responsible person.
Please note that locally applicable laws and regulations determine the minimum age of the operator and
may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified electrician or under the
guidance and supervision of a qualified electrician.
