CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
32
ZI-WP700TN
4.
Loosen the fixing bolt to release the ring end of
the chain for stop pin.
5.
Pull the stop pin out of the base frame.
6.
Insert the lock pin through the hole of the saw
blade cover to block saw blade from rotating.
7.
Loosen and remove the bolt M12x30 with the
wrench packed with the machine. Remove the
washer and front clamping flange and take
down the saw blade.
Insert the new saw blade
The assembly of the new saw blade is done in
reverse order.
C A U T I O N
Make sure that the saw blade is inserted
in the correct position. The arrow on the
saw blade must point in the direction of
the operating side!
16.3
Storage
•
Disconnect the power plug
•
Store unused machines in a dry, locked place out of the reach of children.
To extend the service lifespan of the machine and ensure smooth operation, carry out the following
before
storing it for a longer period of time:
•
Clean the machine thoroughly.
•
Treat all moving parts with an environmentally friendly oil.
Never use grease! Do not oil the engine!
16.4
Disposal
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact
your local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
