ZIPPER MASCHINEN ZI-STM350C, Руководство пользователя

Страница: 19 / 49

MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  19
ZI-STM350C
15 MAINTENANCE
 Attention! Pull out the power plug first!
 After every operation you have to clean your water pump sufficiently with sufficient
clear water! During usage the water gets dirty, stone dust particles get into the water pump.
If you fail to clean the water pump regularly after usage it will become defect.
In this case warranty claims cannot be accepted.
 Clean your machine regularly from dust and dirt. Cleaning is best carried out with a soft
scrubber or a clean cloth.
 Do not use caustic agents for cleaning!
 Change the water in the water basin after each use
 Clean the basin
 Check your blade for any cracks or damages.
 Replace worn or damaged saw blades immediately.
Saw blade replacement
 Pull out the power plug!
 Demount the blade guard.
 Loosen the locknut with an open wrench.
 Remove locknut and flange.
 Remove the old blade and mount the new one. Attention: Take care to mount the blade in the
correct direction.
 Mount the flange and locknut, tighten the locknut.
 Check the mounted diamond blade for eventual wobble by turning it by hand. If wobble
occurs, the flange was not set accurately.