OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-STE1100IV
11
OPERATION
Please check the product contents immediately after receipt for any eventual transport damage or missing parts.
Claims from transport damage or missing parts must be placed immediately after initial machine receipt and
unpacking before putting the machine into operation. Please understand that later claims cannot be accepted
anymore.
11.1
Pre-operation check
11.1.1
Check engine oil
N O T I C E
The generator is delivered without engine oil and fuel!
Engine oil 15W40 must be filled before first use!
See capture maintenance => engine oil change
11.1.2
Check fuel
Place the machine on a firm and flat surface.
Open the fuel cap.
Check the fuel filter.
Never refuel without fuel filter!
Fuel must be unleaded gasoline
NEVER REFUEL IF THE ENGINE IS RUNNING!!
11.2
Operation instructions
N O T I C E
Always place the machine on a firm and flat surface! No turning, tilting or moving during the
engine is running
Always check oil and fuel level before starting
Do not connect the appliance before the unit is running at full speed. Disconnect the
appliance before turning the unit off.
Connected devices must be in perfect condition.
Keep the cable length to the consumer as short as possible.
Содержание ZI-STE1100IV
Страница 83: ...ERSATZTEILE SPARE PARTS ZIPPER MASCHINEN GmbH www Zipper Maschinen at 83 ZI STE1100IV...
Страница 84: ...ERSATZTEILE SPARE PARTS ZIPPER MASCHINEN GmbH www Zipper Maschinen at 84 ZI STE1100IV...
Страница 93: ...PRODUKTBEOBACHTUNG ZIPPER MASCHINEN GmbH www Zipper Maschinen at 94 ZI STE1100IV...