ZIPPER MASCHINEN ZI-KM1000, Руководство пользователя

Страница: 34 / 42

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  34
ZI-KM1000
15 TROUBLE SHOOTING
Trouble Possible cause Trouble
Engine will not start  Incorrect starting sequence  Observe the correct starting
sequence
 Dirty air filter  Clean/replace air filter
 No fuel supply  Refuel
 Fault in the fuel line  Check the fuel line for kinks
or damages
 Engine flooded.  Screw off, clean and dry the
spark plug. Then pull the
cranking rope several times
and reinstall the spark plug
 Spark plug connector not placed
on.
 Place on the spark plug
connector
 No ignition spark  Clean/replace spark plug
 Check ignition cable
Engine starts and is stalled
immediately
 Incorrect idle adjustment  Contact customer service
Machine works with interruptions  Carburetor incorrectly adjusted  Contact customer service
 Spark plug fouled  Clean/replace spark plug
 Check spark plug connector
Machine does not work with full
performance
 Machine overloaded  Too much pressure
 Dirty air filter  Clean/replace air filter
 Carburetor incorrectly adjusted  Contact customer service
Machine does not run while the
engine is running
 Gear is not engaged properly
 Shift lever in right position
switch
Brush stops
 Bowden cable not set correctly  Adjust bowden cable
Machine is not running straight  Different wheel pressure  Check wheel pressure
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.