MONTAGE / ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
13
ZI-GAB165AN/ZI-GAB165GR
12.
Assembly cylinder lock
Insert the cylinder lock (B1) from the
outside into the borehole at the front
panel.
On the inside, place the lock plate
(C8), a washer, a spring washer and a
nut on the cylinder of the lock.
Fix the lock plate (C8) with short
screws (F1) (see illustration on the
left).
13.
Assembly locking mechanism
Unfold the lock rods (B2), attach the
locking mechanism to the cylinder of
the lock and insert the lock rods into
the large bore holes at the side panels
(see illustration on the left).
14.
Assembly cover and gas
spring
Attach the gas springs (G3) on both
sides of the cover.
