ZIPPER MASCHINEN ZI-BRM420, Руководство пользователя

Страница: 25 / 49

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  25
ZI-BRM420 und ZI-BRM508
14 SAFETY
This section contains information and important notices for safe commissioning and handling of
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as possible damage to property and persons. Also
observe the symbols and pictograms used as well as the safety instructions and
hazard warnings!
Intended use of the machine
The machine is intended exclusively for the following activities:
For mowing and mulching lawns within the specified application limits.
ZIPPER-MASCHINEN assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
14.1.1 Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity: max. 65 %
Temperature (for operation) +5° C bis +40° C
Temperature (for storage and/or transport) -20° C bis +55° C
14.1.2 Prohibited Use / Forseeable Misuse
 Operation of the machine without adequate physical and mental aptitude
 Operating the machine without appropriate knowledge of the operating instructions
(m motor).
 Changes in the design of the machine
 Operating the machine in wet and rainy conditions
 Operating the machine in a potentially explosive environment
 Operating the machine indoors or in closed areas
 Operation of the machine without functioning or missing guards
 Remove the safety markings attached to the machine.
 Modify, circumvent or disable the safety devices of the machine.
 Use of the machine for the transport of persons
The prohibited/hazardous use or disregard of the information and instructions presented in this
manual will result in the voiding of all warranty and damage claims against Zipper Maschinen
GmbH.
User Qualification
Prerequisite for the use / operation of the machine is a corresponding physical and mental
aptitude as well as knowledge and understanding of the instruction Manual.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or carried out under the guidance and supervision of a qualified Electrician.
Safety instructions
In order to avoid malfunctions, damage and health hazards when working with this machine, in
addition to the general rules for safe working, the following measures in particular must be
observed UNCONDITIONALLY:
 Check that the machine is in perfect condition before each use. Ensure that all guards are
in place and working properly and that all nuts, bolts, etc. are securely tightened. Do not
take the machine into operation if you notice that parts are missing or damaged!
 Ensure sufficient lighting conditions in the working and surrounding areas of the machine.