MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-ASA305
16
MAINTENANCE
A T T E N T I O N
Don’t clean or do maintenance on the machine while it is still connected to the
power supply:
Damages to machine and injuries might occur due to unintended switching on of
the machine!
Therefore: Switch the machine off and disconnect it from the power supply be-fore
any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced
by trained persons only.
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band guidance
and a clean cut.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
16.1
Maintenance plan
C
lean regularly the filter bag to ensure its filter capacity.
You should check the dust collector hood regularly for deposits that cumulate especially on
the protective fence and clean if necessary. Failure to do so will result in lower suction
capacity and motor overload.
Do not dismount the protective fence, it is a security component.
16.2
Cleaning
After each workshift the machine has to be cleaned. Remove chips and dust etc. with a suitable tool.
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as
well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
16.3
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
