SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
20
ZI-HB204
20
Always stay focused when working. Reduce distortion sources in your working environment. The
operation of the machine when being tired, as well as under the influence of alcohol, drugs or
concentration influencing medicaments is forbidden.
Respectively trained people only and only one person shall operate the machine.
Do not allow other people, particularly children, to touch the machine or the cable. Keep them
away from your work area.
Make your workshop childproof.
Make sure there is nobody present in the dangerous area. The minimum safety distance is 2m
Wear suitable work clothes! Do not wear loose clothing or jewellery as they might get caught in
moving parts and cause severe accidents! Wear a hair net if you have long hair.
Use personal safety equipment: safety gloves, dust musk, ear protectors and safety goggles
when working with the machine.
Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the machine.
Avoid unintentional starting
Do not use the machine with damaged switch
The plug of an electrical tool must strictly correspond to the socket. Do not use any adapters
together with earthed electric tools
Each time you work with an electrically operated machine, caution is advised! There is a risk of
electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids and gases (danger of
explosion)
Check the cable regularly for damage
When working with the machine outdoors, use extension cables suitable for outdoor use
Do not use the cable to carry the machine or to fix the work piece
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
Before starting the machine remove any adjusting wrenches and screwdrivers
Parts can cause severe cut injuries
Keep any machine that is not being used out of reach of children
Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is required.
A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors totally. The
following hazards may arise in connection with the machine´s construction and design:
Risk of injury to the hands / fingers by the tool and tool mount during operation.
Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a suitable tool / device workpiece.
Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety regulations must be observed
with regard to clothing.
Risk of injury due to contacting with live electrical components.
Risk of injury due to dust emissions, treated with harmful agents workpieces
Risk of injury to the hearing by prolonged labor without hearing protection
Risk of injury to the eye by flying debris, even with safety goggles.
These risk factors can be minimized through obeying all security and operation instructions, proper machine
maintenance, proficient and appropriate operation by persons with technical knowledge and experience.
