MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-RTR40V-AKKU
14
MAINTENANCE
WARNING
Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
NOTICE
Clean your machine regularly after every usage – it prolongs the machines lifespan and
is a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location
14.1
Changing cutting tool
To remove the nylon cutter, press and hold
the shaft lock button (1) and unscrew the
head anti-clockwise.
Replace the new or the rewound nylon
cutter and by turning it clockwise
14.1.1
Rewinding the nylon cutter
1. Unscrew the
nylon cutter and
open by pushing
the fastener on
both sides.
2. Cut a piece of nylon
(max. 12m long, Ø1,6mm)
find the center of the line
and loop it onto the notch
in the center
3. Wrap the line
around the spool
leaving about 20cm
line exposed on
each side.
4. Thread the string guides
onto the line as shown.
Slide into place. Do the
same on both sides and
close the nylon cutter.
Pull
on both ends of the line to
free them from the
notches in the spool.
14.2
Maintenance plan
After each workshift:
Check the cutting tools (tight fit, sharpness, damage)
Once a month:
Overall cleaning of the machine
14.3
Cleaning
Once a month the machine and all its parts must be thoroughly cleaned.
