ZIPPER MASCHINEN 9120039232652, Руководство пользователя

Страница: 17 / 68

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  17
ZI-BHA1500D
10.3 Technical details
Voltage 230 V / 50 Hz
Motor power 1500 W
No-load speed 880 min -1
Hits 4350 / min
Max. chisel capacity Ø 17mm
Max. drill capacity Ø 32mm
SDS-plus 10 mm
Weight 4,9 kg
Sound-power level L
WA
104,7 dB(A) bei K: 3dB(A)
Sound-pressure level L
PA
93,5 dB(A) bei K: 3dB(A)
Protection class II
10.3.1 Vibration
Vibration emission value
Uncertainly K=1,5 m/s2
Drilling in
concrete
Main handle a
h
,
HD
= 5,479 m/s 2
Auxiliary handle a
h
,
HD
= 10,901 m/s 2
Chiseling No load
Main handle a
h
,
NL
= 7,104 m/s 2
Auxiliary handle a
h
,
NL
= 7,322 m/s 2
Full load Main handle a
h
,
CH
= 11,900 m/s 2
Auxiliary handle a
h
,
CH
= 18,214 m/s 2
Equivalent value Main handle a
h
,
Cheq
=11,094 m/s 2
Auxiliary handle a
h
,
Cheq
=16,8847 m/s 2
A T T E N T I O N
The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is use!
11 SAFETY
11.1 Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Hammer drilling in concrete, brick and stone as well as for chiselling work.
Drilling without impact in wood, metal, ceramic and plastic.
Any manipulation of the machine or its parts is a misuse, in this case ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
W A R N I N G

Use only drills and chisels allowable for this machine!

Never use a damaged drill or chisel!

Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
Ambient conditions
The machine may be operated:
humidity max. 70%
temperature +5°С to +40°С (+41°F to +104°F)
The machine shall not be operated in areas exposed to increased fire or explosion hazard.