make your home smart
find out more at
ADDING AND REMOVING
Z-WAVE DEVICES
It is recommended to add new devices with the
device manager by pressing the “Add New Device”
button. Select the Z-Wave logo and follow on-screen
instructions.
Devices added with the device manager will be
configured in the following way and in the following
order:
Z-Wave inclusion
Z-Wave secure inclusion, if the device being
added supports the Security command class
Configuration/interview of certain command
classes that are supported by the device being
included
Return routes assignment to primary controller
ADDING Z-WAVE DEVICES WITH THE
DEVICE MANAGER
ADDING Z-WAVE DEVICES WITH THE Z-WAVE NETWORK
MANAGEMENT TOOLS
The recommended way of adding new Z-Wave devices is via the device manager.
Z-Wave network management tools are located under the Zipabox settings.
It is recommended to only use the Z-Wave network management tools to add a new
device only if you have problems with adding your device via the device manager.
Devices added with the Z-Wave network management tools will be configured in the
following way and in the following order:
Z-Wave inclusion
Z-Wave secure inclusion, if the device being added
supports the Security command class
Minimal device configuration/interview, as is mandatory by the
Z-Wave plus specification
Return routes assignment to primary
controller
Z-Wave devices can be removed with the
Z-Wave network management tools:
Navigate to Z-Wave network
management tools
Click the “Remove node” button and
follow onscreen instructions
REMOVING Z-WAVE
DEVICES
www.zipato.com
