31
Getting notifications from pull devices
Some notification devices might require get requests from controllers to send their notification data.
Or users might want to get the notification data manually. This option allows that. To access it first find
the notifications tab (
) in the device browser and find the one you are looking for. Afterwards
click the cogwheel on the right of its name:
Image 64 Endpoint options
Afterwards select the “ADVANCED” tab:
Image 65 Advanced tab
Now you can pull notifications from the device. To pull a notification three fields need to be filled:
•
Alarm type
•
Notification type
•
Event code
These are generic Z-
Wave™
codes and can be found in the official Z-
Wave™
documentation. The device
documentation may also contain these. Entering a non-existing combination it should not cause any
issues with the device or the controller. However it is still recommended to consult the device
documentation (or Z-
Wave™
documentation) before attempting to get notifications from the device.
Image 66 Notification get input