33
5.3.4 Alarm
5.3.4.1 Motion Detection
Click on Motion in Motion Detection menu.
Enable:
Click in box to enable motion detection.
Sensitivity:
Set the motion detection sensitivity level ( 1~ 8)
The higher the level the less pixel colour changes needed to record
Alarm Out:
Click in box to enable alarm output.
Latch Time:
Set the latch time for the alarm trigger (Default = 5 secs)
Post Recording:
Set the post recording time for the alarm i.e after alarm triggers.
(Default = 5 secs)
Send Email:
Click in box to enable Email (Email settings are required)
Enable Record:
Click in box to enable Alarm Record.
Refresh:
Applies default settings
Save:
Saves Motion Detection settings.
Clear:
Clears all motion settings.
All:
Sets whole picture for motion detection. (Complete area red colour)
