Using these instructions
Position the tap such
that it dispenses into
the sink bowl with
clearance for a cup or
tea pot.
Wave Tap:
Observe
100mm 360⁰ clearance
envelope around the
tap head.
Ensure that taps are positioned to minimise
the risks of scalding when dispensing
boiling water.
!
1
3
Position Command Centre
and Tap as close together
as possible.
BC Compact
Cut the hole & fit the spacer
•
Cut a Ø35mm hole in the worktop / sink.
Ø35mm
•
Apply a light smearing of silicone sealant on the
underside of the spacer to ensure a watertight fit.
Please refer to all safety and installation requirements
detailed in the Quick start guide provided with the
HydroTap Command Centre, and HydroTap Command
Centre installation instructions found online, prior to
installation of, or any change to, the complete system.
Before commencing the
installation,download
& read the HydroTap
Command Centre
installation instructions
!
Read the
instructions
WARNING
Tools needed for tap installation
In addition to normal tools, the following (or equivalent
equipment) will be required.
•
35mm diameter sheet metal hole punch for sinks.
•
35mm diameter hole saw for worktops.
•
Tube spanner for fixing the tap assembly (supplied).
Water supply pressure requirements
2
116mm
125mm*
*Dispense height may be increased with the tap extension kit
(sold separately)
Black
plastic spacer
Mount the tap
Pass the tubes and USB cable through the Ø35mm
hole.
Fixing
washer
Spider
clamp
Fixing nut
4
Secure the tap
Use a tube spanner to secure the tap in place.
USB
Black
plastic spacer
Positioning
Wave clearance
100mm
100mm
100mm
100mm
Min - Max pressure, kPA (bar)
Australia
UK
HydroTap
170 (1.7) - 700 (7.0)
170 (1.7) - 500 (5.0)
Sparkling
HydroTap
250 (2.5 ) - 700 (7.0)
250 (2.5) - 500 (5.0)
Booster
200 (2.0) - 700 (7.0)
200 (2.0) - 500 (5.0)
Be aware of the risks of hazards which could
cause harm when using tools. Assess the
risks before starting the installation.
!
