801352 - May 2013 v1.00
Page 2 of 4
Installation Instructions
Step 2 - Connection to mains water supply
Connect supply line as shown in Fig.4.
Cut the white tube to length to fi t between the inlet assembly and fi lter head. However, before connecting the tube into
the fi lter head, fl ush approximately 2L of water to waste.
Step 3 - Connection to filter inlet
Fit other end of tube to filter inlet as shown in Fig.6.
Fig.5
*How to fit John Guest fittings:
Insertion and removal details for JG fittings using plastic tubing. (See Fig.5)
Cut the tube squarely with a sharp knife or tube cutter.
Shake out and remove any swarf or debris.
Note:
the direction arrows on the fi lter head
instructions on how to connect JG tubing and
fi ttings.
1/4” John Guest
Tapered adaptor 1/2” BSP
Filter Inlet
Isolation valve
(not supplied)
Fig.4
Fig.6
Fig.7
