Subito Cotto 60, 80 and 95 Models
User Manual - English
Page
2
A valid method to heat your new oven is to provide a fire in another separate place. Then take the brace and place it
into the oven. So it can generate heat without the flame and the oven is pre-heated as required. Some clients find this
much easier way to do this first phase.
The last traces of "water" from the elements in refractory will be completely deleted when it reached a temperature
of over 400°C - 750°F.
NOTE
Due to the normal thermal expansion, small cracks may appear in the inner dome or in the oven floor without
compromising product quality.
OVEN COOKING
The oven has an internal volume of small dimensions, so you should not and it is not necessary to make big fire. You
will notice that the oven temperature will rise rapidly even with a small fire.
Feeds the fire with little logs at a time to avoid sudden increases in temperature.
Be careful when inserting the wood in the oven, always use dry wood (dried for at least two years).
If you see any trace of humidity coming from the logs pieces while they are on fire, they are not dry. The use of wet
logs will cause a considerable emission of smoke from the oven and may cause damage to the dome for the high
humidity content.
TIPS AND PRECAUTIONS
•
Use kitchen gloves, oven or pot holders to grab the door while using the oven to prevent burns from contact
with hot parts.
•
Care must be taken near the oven. All parts are very hot during use and remain so for hours after the fire has
•
extinguished.
•
In case of heavy rain it is recommended to protect the oven.
•
Do not use wet or soaked equipment to cool or clean the floor of the oven when it is hot, do not extinguish
the fire with water.
FIRE WARNING AND LOCAL DEPARTMENTS
Be careful, place the oven far away from any combustible material. Every local building
code is unique, please consult your local building code or your Fire Department for the
exact specifications for your community.
You are responsible for following all local building codes.
GAS OVEN AND BURNER
SEE AVANZINI USER MANUAL ATTACHED
TEK. REF. SRL
Office and Factory: Z.I. Loc. Feurredda SNC
–
09088 SIMAXIS (OR)
Tel. +39 0783 406005
–
Fax +39 0783 406135
Web:
eMail:
P.IVA 01088030950
–
R.E.A. n. 129538