Zinwell WPL-2N00 Скачать руководство пользователя

Страница: 30 / 36

Mixed mode

: In this mode the device transmits the packets

with preamble compatible legacy (802.11g), so they can be

decoded by legacy devices. The device receives and

decodes both Mixed Mode packets and legacy packets.

Green Field mode

: the device transmits HT packets

without legacy compatible part. But the device receives and

decodes both Green Field and legacy packets.

(Bandwidth)

Choose “20” for the standard bandwidth or “Auto” to use
the 40MHz bandwidth automatically.

(Guard Interval)

Choose “Long” to use long guard interval or “Auto” to setup
the GI automatically.

MCS (

Modulation

Coding Scheme

)

Choose MCS. Please refer to the section of Access Point.

QoS

QoS Configuration

Item

Description

WMM

Check the box to enable WMM function. It depends on the

associated AP, if it supports WMM and you can enable this

function on this device.

WMM Power Saving

Check the box to enable WMM function. It depends on the
associated AP, if it supports WMM and you can enable this
function on this device. When enabled, the options below
can be configured.

PS Mode

The options are “AC_BE”, “AC_BK”, “AC_VI” and
“AC_VO”. Please select the respective options according to
the AP.

11n Configurations

11n Configuration

Item

Description

MPDU Aggregation

Check the box to enable this function. Click on “Manual”

radio button to setup the MPDU or “Auto” to setup

automatically.

MPDU density

Select the MPDU density.

Aggregation MSDU
(A-MSDU)

The multiple HT packets can be transmitted with single
ACK reply packet. Enable it to apply this function and
reduce the network congestion.

Содержание WPL-2N00





































Результаты поиска

Содержание WPL-2N00

Отзывы:

Похожие инструкции для WPL-2N00

Бренды по названию

Популярные бренды

Zinwell WPL-2N00, Руководство пользователя

Результаты поиска

Содержание WPL-2N00

Отзывы:

Похожие инструкции для WPL-2N00

Бренды по названию

Популярные бренды