Step 5
You will now see a menu like this:
With your remote, go down to
LNB 1
and check if the Signal Box (Located on the bottom right is showing a Yellow bar
(100%
or equivalent).
If not?
then toggle right and wait a few seconds and see if the signal box shows any signal. This is normally either LNB 1 or LNB
2
Once you have found which LNB has the signal at 100% then proceed to the next step.
Step 6
Go up to
OPTUS D1
and toggle
the
right arrow key,
toggle the
down arrow key
to select
USER SATELLITE
, and press
OK
(You will notice the signal indicator is at 0%, this is normal)
On your remote, Press
OK
and
OK
again to save.
Scroll down to
LNB No.
and select the LNB number you found in the previous step (That did contain a signal).
There will be no
signal indication at this stage.
Press
OK
to exit.
Then press
EXIT
to return to the main menu
.
Step 7
