12
REMOTE CONTROL GUIDE
Understanding the remote control features
• The adjustable bed uses RF (radio frequency) remote control system.
•
It is not necessary to face the receiver when operating the remote control. Remote signal is best transmitted
within 9 feet (3 meters) of the bed.
NOTE:
The bed may show minor intermittent performance because of typical radio frequency interference.
This is normal in the operation of the bed, not a defect.
Synchronizing two beds for tandem operation
1
2
3
4
Plug both Bed A and Bed B to working and grounded electrical
outlets. A surge protector is recommended.
Before starting the sync process, press the FLAT button on
Remote A and Remote B to align the beds properly.
On Bed B, the LED light on the control box blinks three (3) times
once the power cord is plugged in, and is in learning mode for
seven (7) seconds.
During learning mode, use Remote A and press the HEAD UP
and FOOT UP buttons at the same time for three (3) seconds.
The LED light on the control box will light up and remain on,
which means the pairing is successful. Bed A and Bed B can
now be controlled simultaneously using Remote A.
NOTE:
When operating beds in tandem, both beds should be
plugged into working and grounded electrical outlets.
To operate two adjustable beds simultaneously, you must pair both beds (Bed A and Bed B) to one remote control
(Remote A).
LED light on the control box
Содержание GALAXY
Страница 1: ...ADJUSTABLE BED Owner s Manual GALAXY ...
