background image

1.

IMPORTANT

BATTERY CARE AND MAINTENANC

E

1.  Make sure that your ZINGO X300 is fully charged prior to initial use. The first charge will take 12 hours. Wait for the    

full 12 hour charge period before unplugging
2.  Always charge your ZINGO X300 after every use
3.  DO NOT leave your ZINGO X300 charging for more than 5 hours (except for first 12 hour charge)
4.  Should you wish to store your ZINGO X300, charge it beforehand and make sure to charge once every 14 days

This manual contains vital information regarding product care as well as best riding practices, riding conditions, and 

precautionary measures. Read through this entire manual before riding, and make sure to heed all warnings. Failure 

to do so may result in your 

ZINGO X300 

not being covered by warranty.

 

WARNINGS

The ZINGO X300 is not intended to be used on public roads where there are cars, buses, taxis or any other licensed motor 

vehicles. Make sure to familiarize yourself with the traffic rules and regulations in your area to determine where it is safe for you 

to ride your scooter.

Riding the ZINGO X300 can result in serious injury or even death regardless of the ability of the rider, any factory fault, any 

precautions taken or conditions in which they (the rider) were riding in. Make sure to check that all nuts and bolts are tightly 

fastened before use, that your brakes are in proper working condition, and that you are both able and competent to handle 

this scooter. Parents should be made aware that this scooter is not for children under the age of 10, and further still, that riders 

above this age should show a suitable degree of awareness, skill and ability to handle a ride-on of this nature.

Do not exceed the weight limit of 100kg. The rider’s weight does not necessarily mean that their size is appropriate to maintain 

control of the scooter.

RIDING CONDITIONS, METHOD AND APPROPRIATE APPAREL

Make sure to use protective gear in the form of elbow and knee pads as well as a helmet and appropriate footwear. Gloves and 

goggles are recommended.

Riders will become accustomed to riding the ZINGO X300 over time. Accidents can occur when given to someone who has 

never ridden a scooter before. Exercise caution when allowing a first-time rider to get onto the ZINGO X300. The rider should be 

instructed on how to ride the ZINGO X300 (see full details on “HOW TO RIDE YOUR ZINGO X300” below).

Use caution when riding, and make sure to always be aware of your surroundings so as to avoid any pedestrians, other riders, 

animals or fixed obstacles that may cause you, or you may cause, any injury. The ZINGO X300 is not designed to withstand any 

extreme manoeuvres. Do not attempt to perform any tricks, wheelies, bunny hops or any other extreme manoeuvres on the 

ZINGO X300. Evidence of such abuse will render your warranty void.

Assess riding conditions before making use of the ZINGO X300, and do not ride through any gravel, mud, water, sand or on any 

off-road surface. Do not ride your ZINGO X300 in the rain, or through any adverse weather conditions. The electrical and drive 

components could be damaged by riding through the aforementioned elements or surfaces and will render your warranty void.

HOW TO RIDE YOUR 

ZINGO X300

The ZINGO X300 has a variable-speed accelerator (throttle) like that found on a motorcycle. You can control your speed 

precisely by slowly opening the throttle. Opening the throttle further will result in increased speed. Do not snap the throttle 

open suddenly as this will rapidly project the scooter forward. This may result in you losing control of the ZINGO X300 and can 

result in damage to property or cause you serious injury.

Before turning the ZINGO X300 on make sure that the scooter is aimed towards an open space with nothing in front of you. 

Put one foot on the deck and hold the handlebars firmly. Familiarize yourself with the brakes before switching on your ZINGO 

X300. Hold the accelerator firmly and slowly twist it open. As the scooter starts to move forward and you have enough speed 

to balance, place your second foot onto the deck. Slowly open the throttle until you get to the required speed for the 

conditions in which you are riding, whilst maintaining a speed suitable for your ability. Build your speed up gradually as you 

become familiar with the scooter. Practise using the brakes while you are going slowly. Avoid opening the throttle to its 

maximum until you are well accustomed to the scooters handling and braking. Fully opening the throttle will result in your 

batteries discharging rapidly, and your range will be adversely affected.

Содержание X300









Отзывы: