10” zinglife e-tab
User Guide to Android™
Setting up your e-tab
Open the package and carefully remove the packaging. It‟s
recommended that you retain the package for the duration of the
warranty period.
Your Zinglife e-tab has a screen protector (a thin film to protect the
screen during transit). Please slowly and carefully remove this from the
screen as it will reduce the quality of the screen image. Wipe the
screen with a clean damp cloth.
Battery Charging
Your Zinglife e-tab has a built-in rechargeable lithium battery. We
recommend that you charge the battery for at least
8 Hours
for its first
charge, to achieve the best battery life.
To maximise your battery life it‟s recommended that you always
fully
charge the battery and then use the Zinglife e-tab unplugged until the
battery power is low, at which point you can recharge the battery.
Using
full charging and draining cycles
is much better than charging
the battery bit by bit.
To charge the battery
, simply connect the power adaptor to your mains
wall socket and the DC Power Input and switch it on.
The LED Battery Indicator (at the top right of the e-tab) will
illuminate red.
Once the battery is fully charged the LED will turn off.
You can see the battery charge status in the menu bar at the
top of your e-tab‟s screen.
NOTE:
The LED will illuminate ‘Blue’ when the eTouch is powered
ON (even when in standby mode). It will show Blue and Red
when powered ON and charging.
Battery Icon
The Battery icon shows in the menu bar at the
top of your screen. It shows the amount of charge in your
battery. Only use the authorised Zinglife power adaptor as
supplied in your package.