User manual and manufacturer s specifications
Your roof protects the building, furnishings and assets. In
order for you to be able to enjoy a fully functional roof in the
long-term, it has to be installed professionally and maintained
at regular intervals during use and, where necessary, re-
paired. In order to do this it is important to ensure that works
carried out on a roof can be carried out safely. The client and
(perhaps later on) the owner is also under obligation here and
is responsible for ensuring compliance with all specifications
relating to occupational safety on a roof.
ZinCo Fallnet
®
ASG, in conjunction with a green roof serving
as ballast, is a collective edge protection system for temporary
maintenance works in accordance with EN 13374 Class A.
Scope and requirements for use
Fallnet
®
ASG may only be used for its intended purpose as an
edge protection system for temporary maintenance work. Any
changes or additions to the system components may not be
carried out without the prior written permission of the manu-
facturer.
• The Fallnet
®
ASG may be used up to a maximum roof
pitch of 5° in the direction of the falling edge.
• The edge protection system may be used during frosty
conditions provided the edge protection system was
installed in frost-free conditions.
Requirements relating to use and the users
of Fallnet
®
ASG
The Fallnet
®
ASG collective edge protection system offers the
advantage that it protects everyone working on a roof without
them having to take special measures.
The user is to be instructed to carry out the following visual
and manual checks prior to starting work at the edge of a
roof:
• visual check of the visible parts (e.g. for deformation, corrosion)
• visual check of the ballast depth
Evidence of restricted functioning could be, where:
• parts are deformed, weakened or very dirty and if they are
not in their original state,
• an uneven substrate height is established, e.g. due to drifting,
• the horizontal foot of the post module is visible.
If there is any doubt as regards the safe condition or proper
functioning of the product, the client/the owner should be
informed and the product must not be used until the matter is
clarified.
Label
A label is attached to each post, handrail and mid rail and
to the toe board with the following information:
Manufacturer:
ZinCo GmbH, Type Fallnet
®
ASG
Standard: Collective edge protection system for temporary
maintenance work as per EN 13374 Class A
Year and month of manufacture in that
order.
Authority used for certification
Details of the manufacturer and of the testing body
Manufacturer:
ZinCo GmbH
Lise-Meitner-Strasse 2
72622 Nürtingen, Germany
Tel. +49 7022 9060-770
Fax +49 7022 9060-610
[email protected]
www.zinco-greenroof.com
Testing body:
DEKRA Testing and Certification GmbH
Dinnendahlstrasse 9
44809 Bochum, Germany
As of 2/2019, subject to technical changes,
we assume no liability for print errors, Art. no. 120011
