11. Certification
12. Trademark and Legal Statement
ZIMX and ZIMX POWER are trademarks of UKBIGBUY.COM, registered in UNITED KINGDOM and various
other countries. The respective owners reserve the rights of their trademarks referred to in this manual. The ZIMX
is covered by relevant patents. Contact us for patent information from the manufacturer. We have attempted to
include descriptions and instructions for all the functions of the ZIMX POWER at the time of printing.
However, your unit may differ slightly from the one shown in this document. Please note that there are multiple
ZIMX models with different functions, and some of the functions mentioned herein may not be applicable to your
unit. The manufacturer and us reserve the right to change the design and functionality of the ZIMX product and
documentation without prior notice. ©2021 UKBIGBUY.COM . All rights reserved.
This product has been tested and passed ANSI/CAN/UL-2272.
The battery complies with UN/ DOT 38.3
Electromagnetic Compatibility Directive & Low-Voltage Directive. UKBIGBUY.COM declares, that the equipment
listed in this section are in compliance with the essential requirements and other relevant provisions of
Directives 2014/30/EU & 2014/35/E
Please keep the proof of purchase (i.e., receipt) to make sure your limited warranty.
Limited warranty;
1 year for vehicle, except battery or other consumables.
6 months for battery
.
The warranty will be invalid under following conditions; (more info at UKBIGBUY.COM)
·
Opening up the unit by an unlicensed / unprofessional hoverboard tech person
·
Purchase Receipt is not in accordance with the unit
·
Inappropriate handling/use/maintenance of the unit
·
Non-compliance with the points from the manual
13. Warranty
14
10. Calibration and Alarms
Calibration
When in Balance Mode, if the ZIMX POWER moves forward or backward on its own on flat gound, it needs to be
calibrated, if the problem persists, please contact after-sales customer service.
To Calibrate the ZIMX POWER
Confirm that the hoverboard is in the off state and keep both side of the pedals parallel to the horizontal plane.
Make sure the hoverboard is turned off, press and hold the power switch for 5 seconds and then release it. When
you hear a beep sound, the system starts to calibrate.
The red light (that is, the running indicator and the left turn indicator) flashes 3 times. Wait until the red light is
on, the system calibration is complete, and you can should now turn it off and on again.
The unit will know be ready to use again. There is no limit to the amount of times you can do this calibration.
Self-balance
Manual adjustment: Place the unit horizontally - make sure the unit is turned on,press the power switch for about
6 seconds, until you hear the beep, then restart the hoverboard, the adjustment complete.
Child mode / Adult mode
Manual adjustment: Stand up the ZIMX POWER, press the power button to turn it on - release the button - then
keep press. The button remains for about 6 seconds until the beep is heard and the balance hoverboard is restarted.
Complete child mode switching
Alarm
a. Overheating Riding for an extended period of time could increase the internal temperature of your ZIMX POWER in
excess of 122°F(50º C). If this happens, the glow lights will flash, and an alarm will sound and your ZIMX POWER will not
be able to charge. Simply step off the ZIMX POWER, power it off, and give it time to cool back down to a normal
operating temperature.
b. High speed riding will cause a lift alarm, so please slow down so the alarm has stopped while riding.
c. Other alarms.
For any other alarms, try restarting your ZIMX POWER. If the problem persists, please contact after-sales service.
15
