ZIMO MX1, Инструкция по эксплуатации

Страница: 30 / 32

Page 30 COMMAND STATION MX1, MX1HS, MX1EC
4.11. Reply to message 0x0A, code 6
(query command station loco memory)
If there is no error within the request, the level 1 acknowledgement contains the requested data. If
logging is activated for a loco address, this message is sent spontaneously as level 2 acknowledge-
ment and the sequence-ID of the message being “replied to” is set to zero.
Header byte Value Description
1 0-255 unique sequence-ID
2 3 (5) reply level 1 (level 2) – short frame
3 xxx (0) sequence-ID of the message being replied to
4 0 no error within the request
5 cAdr_hi address high byte
bit 6 + bit 7 format specification (see
4.6
)
6 cAdr_lo address low byte
7 cSpeed Speed step of the current speed step system
(DCC data signal: 0-14, 0-28 or 0-126; according to bit 3/2 in
cData1;MOTOROLA protocol: 0-14)
8 cData1 bit 7: MAN (override signal controlled speed limit)
bit 6: no function
bit 5: direction (0 = forward, 1 = reverse)
bit 4 headlights on/off (= DCC function F0)
bit 3/2 DCC speed step system (see
Speed step system
4.7
)
bit 1 decel. time “BZ” (definable by command “B”) on/off
bit 0 accel. time “AZ” (definable by command “B”) on/off
9 cData2 bit 0-7: function outputs 1-8 on/off (DCC only)
10 cData3 bit 0-3: function outputs 9-12 on/off (DCC only)
11 cAzBz bit 0-3: BZ (0 - 15)
bit 4-7: AZ (0 - 15)
12 cStatus 1 … address is active
4.12. Reply to message 0x0A, code 7
(query command station accessory decoder memory)
If there is no error within the request, the level 1 acknowledgement contains the requested data.
Header byte Value Description
1 0-255 unique sequence-ID
2 3 (5) reply level 1 (level 2) – short frame
3 xxx (0) sequence-ID of the message being replied to
4 0 no error within the request
5 cAdr_hi address high byte
bit 6 + bit 7 format specification (see
4.6
)
6 cAdr_lo address low byte
7 cPair 0 … paired output function
1 … single output function
8 cOutputs state of the 8 outputs
4.13. Reply to message 0x0A, code 8
(address control)
Header byte Value Description
1 0-255 unique sequence-ID
2 3 reply level 1 – short frame
3 xxx sequence-ID of the message being replied to
4 0 no error within the request
5 ffa0sskl
ff used format specification (see
4.6
)
a 1: accessory address 0: loco address
ss used speed step system (see
Speed step system
4.7
)
k lock address if bit is set (no external changes)
l log external changes if bit is set