Zimmer Z Lipo, Инструкция по эксплуатации, Страница: 20 / 36

Basic settings
6
Page 12
Programme screen
(in manual mode)
1 2 3 4 5
10 9
(1) Selected applicator The selected applicator (left, right or both) is displayed in orange. The applicator can
be changed by pressing the corresponding button.
(2) Treatment time Displays the remaining treatment time
(3) Temperature Displays the applicator temperature
(4) Vacuum intensity Displays vacuum intensity. By pressing the arrow keys, the vacuum can be
increased and decreased.
Vacuum intensity: 1 - 10. The default is an intensity of 5.
(5) Operating mode The operating mode (Auto or Manual) can be selected by pressing the appropriate
key and will then appear in orange.
(6) Parameter Displays the parameter
(7) Treatment start Pressing the start button begins the treatment.
(8) Tones Turns the beeps on and off when pressed
(9) Colour of Display Changes the background colour of the display from dark to bright and vice versa
(10) Reset Treatment
time
By pressing the reset button the treatment time will be set to the start again.
6
7
8