11
11 Maintenance
NOTICE
Material damage resulting from blowing out with compressed air
Blowing out the product with compressed air can cause malfunctions and pose a risk of accidents.
►
Never purge the product with compressed air.
NOTICE
Material damage caused by unsuitable cleaning materials
Liquid and solvent-based cleaning agents can cause malfunctions and pose a risk of accidents.
►
Do not clean the product with any cleaning agents that are liquid or contain solvents.
Maintenance-free operation of the product is guaranteed for up to 10 million cycles.
►
Note that the product could become damaged under the following circumstances:
• Operation with impermissible compressed air
• Dirty environment
• Improper use and use that does not comply with the performance data
• Permissible temperature range not observed
►
Even though the product is maintenance-free as mentioned above, perform a regular visual inspection to check for any
damage or contamination.
►
Have maintenance work that requires disassembly of the product performed by customer service if possible.
Ö
Dismantling and reassembling the product without authorization may result in complications, as special installation
equipment is required in some cases. Zimmer GmbH accepts no liability for any resulting malfunctions or damage.
12 Decommissioning/disposal
INFORMATION
When the product reaches the end of its operational phase, it can be completely disassembled and disposed of.
►
Disconnect the product completely from the power supply.
►
Dispose of the components properly according to the material groups.
►
Comply with the locally applicable environmental and disposal regulations.
INSTALLATION AND OPERATION INSTRUCTIONS:
MGH8000
DDOC00279 / a
EN / 2023-02-13
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание MGH8000
Страница 2: ......
