Zimmer GPP5025N-00-A, Инструкция по установке и эксплуатации

Страница: 15 / 18

15
10.6 Installing the support structure
CAUTION
Risk of injury from collision
►
Make sure that when the product is moving, the support structure does not collide with other parts of the
machine in which the product is installed.
NOTICE
This customer-specific support structure must be designed such that it does not impede the movement of the
gripper jaws.
Dimension A may not be exceeded by the support structure.
Dimension B may be exceeded by the support structure.
►
For the dimensions required for the customer-specific support structure, refer to the technical data sheet
found on our website.
INFORMATION
GPD5000 series: You cannot install an additional support structure if a pressure piece is installed on the product.
It is possible to remove the cover plate in order
to use a customer-specific support structure.
For installing a support structure, there are
additional fits under the cover plate.
3
1
2
1
Dimension B
2
Dimension A
3
Cover plate
10.7 Installing accessories
NOTICE
►
Before installing an accessory, make sure it is suitable for use with the selected variant.
►
You can find information on our website.
►
Please contact Zimmer Customer Service if you have any questions.
INSTALLATION AND OPERATING INSTRUCTIONS: GPP5000, GPD5000
DDOC00196 / m
EN / 2023-06-05
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com