Zimmer GPP5000 Series, Инструкция по установке и эксплуатации

Страница: 17 / 19

17
11 Maintenance
WARNING
Risk of injury from crushing
Removing the cover of the wedge hook transmission results in a crushing hazard between the gripper jaws.
Crushing injuries can result from the gripping process.
►
Make sure that there are no parts of the body in the range of movement of the product!
► Only permit installation, maintenance and servicing work to be carried out by trained personnel.
►
Do installation, maintenance and servicing work in manual jog mode only.
WARNING
Risk of injury due to objects being ejected
The product has integrated gripping force retention. This device is a spring that acts as an energy accumulator.
When uninstalling the piston cover, it and/or the piston can be ejected due to the pretensioned spring.
► When disassembling the product, use a device that prevents the piston or the piston cover from being ejected.
► Have maintenance work be performed only by Zimmer Customer Service.
CAUTION
Risk of injury from impact
When the gripper jaws are opening, there is a risk of impact in the guide area.
CAUTION
Material damage resulting from blowing out with compressed air
Blowing out the product with compressed air can cause malfunctions and pose a risk of accidents.
► Never purge the product with compressed air.
CAUTION
Material damage caused by liquid and solvent-based cleaners
Liquid and solvent-based cleaning agents can cause malfunctions and pose a risk of accidents.
►
Do not clean the product with any cleaning agents that are liquid or contain solvents.
Maintenance-free operation of the product is guaranteed for up to 30 million cycles , with the exception of mainte-
nance-free operation of the product for installation sizes GPP50XX-AL-A and GPD50XX-AL-A within up to 15 million cycles .
The maintenance interval may be shortened under the following circumstances:
• Dirty environment
•
Improper use and use that does not comply with the power specifications.
• Operation with impermissible compressed air
• Permissible temperature range not observed
• Ambient temperature > 60°C
► Even though the product is maintenance-free as mentioned above, perform a regular visual inspection to check for any
damage or contamination.
►
Have maintenance work be performed by Zimmer Customer Service whenever possible.
Ö
Dismantling and reassembling the product without authorization may result in complications, as special installation
equipment is required in some cases. Zimmer GmbH accepts no liability for any resulting malfunctions or damage.
INSTALLATION AND OPERATING INSTRUCTIONS: GPP5000/GPD5000
DDOC00196 / k
EN / 2022-08-08
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com