15
10.4 Attaching the torque support arm
NOTICE
Non-compliance may result in material damage.
The torque support arm is designed so that lateral torques are not applied to the middle part with floating bearing.
►
Implement the torque support arm as shown.
Exchanging the standard torque support arm for a 2-point screw fitting in the middle part may damage the seals
and the inner electric slip ring system.
INFORMATION
The pin must be manufactured according to DIN ISO 2768 - fH.
►
Calculate the pin diameter for the torque support arm using the dimensions from the dimensional drawing on
the data sheet.
►
Arrange the pin of the torque support arm
parallel to the turning axis or casing surface
of the product.
►
Maintain a parallelism tolerance of
0.1 mm.
br
5
bs
5
Torque support
br
Specification for pin diameter
bs
Pin
10.5 Installing accessories
NOTICE
Before installing an accessory, make sure it is suitable for use with the selected variant.
►
You can find information on our website.
►
Please contact Zimmer Customer Service if you have any questions.
INSTALLATION AND OPERATING INSTRUCTIONS:
DVR
DDOC00222 / g
EN / 2022-01-13
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
