Zimmer CryoMini, Инструкция по эксплуатации

Страница: 34 / 38

Manufacturer´s EMC declaration
18
Page 27
Medical electrical devices, such as CryoMini, are subject to special precautions with regard to electromagnetic compatibility
(EMC), and must be installed and commissioned in accordance with the EMC advice given in the instructions for use or
accompanying documents.
Portable and mobile HF communication systems (e.g. mobile phones) may interfere with medical electrical equipment.
CryoMini may only be operated with the original power cable specified in the scope of delivery.
Operating the device with any other mains cable can lead to increased emissions or reduced interference immunity of the
device!
Guidelines and manufacturer’s declaration – electromagnetic emitted interference
The CryoMini device is intended for use in the electromagnetic environment specified below. The customer or the
user of the CryoMini device should assure that it is used in such an environment.
Interference tests Compliance Electromagnetic environment - guideline
HF emissions according to CISPR 11 Group 1 CryoMini uses HF energy only for its internal
function. Its HF emission is, therefore, very
low and it is unlikely that this will cause
interference to neighbouring electronic
equipment.
HF emissions according to CISPR 11 Class B The CryoMini device is suitable for use in all
installations, including those in a residential
environment, and those which are directly
connected to the public mains network, which
also supplies buildings which are used for
residential purposes.
Harmonic emissions according to IEC
61000-3-2
Class A
Voltage fluctuation emissions and flicker
according to IEC 61000-3-3
Conforms
The device should not be used when placed immediately next to or stacked on top of other devices. If operation is necessary
when immediately next to or stacked on top of other devices, the device should be monitored to ensure it is operating as
intended in this arrangement.