Zimmer Biomet Headless Compressionand Twist-Off Screws, Хирургическая техника

Страница: 20 / 20

References
1. FRS Update (FRS and Twist-Off screws) Design Rationale. FX000090
Rev. C. Bending strength analysis is not necessarily indicative of
clinical performance.
This material is intended for health care professionals and the Zimmer
Biomet sales force only. Distribution to any other recipient is prohibited.
All content herein is protected by copyright, trademarks and other
intellectual property rights owned by or licensed to Zimmer Biomet
or its affiliates unless otherwise indicated. This material must not be
redistributed, duplicated or disclosed, in whole or in part, without the
express written consent of Zimmer Biomet.
Check for country product clearances and reference product specific
instructions for use. For complete product information, including
indications, contraindications, warnings, precautions, and potential
adverse effects, see the package insert and www.zimmerbiomet.com.
This technique was prepared in conjunction with a licensed health
care professional. Zimmer Biomet does not practice medicine and
does not recommend any particular orthopedic implant or surgical
technique for use on a specific patient. Information on the products
and procedures contained in this document are of a general nature and
does not constitute medical advice or recommendations. The surgeon is
responsible for determining the appropriate device(s) and technique(s)
for each individual patient and this document does not replace the need
for examination and/or advice in whole or its part by a surgeon.
CE Mark on the surgical technique is not valid unless there is a CE Mark
on the product (description) label.
©2016 Zimmer Biomet
BMET1228.0 • REV0616
Authorized Representative
Biomet UK Ltd.
Waterton Industrial Estate
Bridgend, South Wales
CF31 3XA
UK
Legal Manufacturer
Biomet Trauma
P.O. Box 587
56 E. Bell Drive
Warsaw, Indiana 46581-0587
USA
www.zimmerbiomet.com
CE mark on a surgical technique
is not valid unless there is a CE
mark on the product label.
0086