Zilogic Systems ZIO, Руководство пользователя

Страница: 8 / 26

ZIO, Motherboard User Manual Rev. 2.0
Zilogic Systems Page 5
Table 2.3. DIO Header
Pin # Header Signal Signal Type
1 VCC +5V
2 DO0 TTL Out
3 DO1 TTL Out
4 DO2 TTL Out
5 DO3 TTL Out
6 DO4 TTL Out
7 DO5 TTL Out
8 DO6 TTL Out
9 DO7 TTL Out
10 DIO8 OC
2
11 DIO9 OC
2
12 DIO10 OC
2
13 DIO11 OC
2
14 GND Ground
1
5V tolerant input
2
Open collector, with 5V pull-up
VCC (Pin 1) This is the +5V power supply for the external devices. The supply has
a total current limit of 200mA when powered through USB.
DO (Pin 2-9) These are digital output signals. The signal is a 5V logic signal, but the
output can drive a 5V device or 3.3V device with 5V tolerance.
DIO (Pin 10-13) These are digital input/output signals. The signal is a 5V logic signal,
but the output can drive a 5V device or 3.3V device with 5V tolerance.
These signals can be used as control and hand-shake signals. The
signals are pulled up to 5V, through a 10K resistor.
GND (Pin 14) This is the ground signal. All other signals are referenced to this signal.
4. PWM Pinmap
The PWM header is terminated with 5 pulse width modulation signals and power supply. Add-on
boards like LED control, motor control can be connected through this header.