background image

Getting Started with Zilog’s ZMOTION

TM

 Development Kit 

 
 
 
 

UM022801-0610 

 18 of 18 

 

Warning:    DO NOT USE IN LIFE SUPPORT 

LIFE SUPPORT POLICY 

ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE 
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE 
PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.  

As used herein 

Life support devices or systems are devices which (a) are intended for surgical implant into the body, or 
(b) support or sustain life and whose failure to perform when properly used in accordance with 
instructions for use provided in the labeling can be reasonably expected to result in a significant injury to 
the user. A critical component is any component in a life support device or system whose failure to 
perform can be reasonably expected to cause the failure of the life support device or system or to affect 
its safety or effectiveness. 

 

 

 

 

 

 

 

Document Disclaimer 

©2010 by Zilog, Inc. All rights reserved. Information in this publication concerning the devices, 
applications, or technology described is intended to suggest possible uses and may be superseded. 
ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF 
ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS 
DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY 
INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR 
TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this 
document has been verified according to the general principles of electrical and mechanical engineering.   

 

Z8 Encore!, ZMotion and Z8 Encore! XP are registered trademarks of Zilog, Inc. All other product or 
service names are the property of their respective owners.

 

 

Содержание ZMOTION Series



















Отзывы: