ZiLOG Z8 Encore!, Быстрый старт

Страница: 5 / 9

Z8 Encore!
®
Z8F642 MCU
Evaluation Kit Quick Start Guide
Page 5
QS002802-0703 Getting Started Using ZDS II
7. When the installation is complete, a reminder screen appears asking you to register the
product online at www.zilog.com. To register at a later time the registration link to the
internet site is found in the ZDS II Help menu.
8. The following directory is installed on the host PC, assuming all installation settings
remain at their defaults:
C:/Program Files/ZiLOG/ZDSII_<product>_<version number>.
Getting Started Using ZDS II
Perform the following procedure to open an existing project.
1. Connect the Evaluation board to the host PC’s serial communications port using the
Smart Cable.
2. Apply power to the Evaluation board.
3. Run the ZDS II Software (
Start
>
Programs
>
ZDS II
_
<product>_<version
number>ZDS II <product><version number>.
4. Select
Open Project
from the
File
menu. The
Open Project
dialog box appears. See
Figure 3 (example only).
Figure 3. Open Project Dialog Box
5. Browse to the samples directory:
c:
\
Program Files
\
ZiLOG
\
ZDSII_<product>_<version number>
\
Sam-
ples
\.Select samples . The samples folder appears (Figure 4).
Downloaded from Elcodis.com electronic components distributor