ZiLOG Z51F0811 MCU, Руководство пользователя

Страница: 16 / 42

Install the Z8051 OCD Software and Documentation UM024201-0212
6
Z51F0811 MCU Evaluation Kit
User Manual
1. Connect the OCD hardware to the USB port of your PC by connecting the A-Male end
of one of the two USB A (male)-to-Mini-B cables with the host PC’s USB port, and
connect the Mini-B end to the OCD device.
2. After the PC detects the new hardware, it will display the
Found New Hardware Wiz-
ard dialog box, shown in Figure 4. Select Install from a list or specific location
(Advanced)
; then click
Next
.
3. The next dialog box, shown in Figure 5, prompts you to enter a path or navigate to the
directory in which the
.inf
file was installed. Depending on the type of computer you
use (32- bit or 64-bit), use the
Browse
button to navigate to one of the following paths
and click the Next button, leaving all other selections at their default settings.
– On 32-bit machines, use the following path:
<Z8051 Installation>\Z8051_ <version> \device drivers\OCD USB\x32
– On 64-bit machines, use the following path:
<Z8051 Installation>\Z8051_ <version> \device drivers\OCD USB\x64
Figure 4. The Found New Hardware Wizard Welcome Screen