ZiLOG eZ80, Руководство пользователя

Страница: 13 / 21

User Manual UM015201-0603 eZ80
®
Sales Demonstration Platform Setup
ZiLOG Development Platforms
eZ80
®
Sales Demonstration Platform
7
You can now run through the available demo project features. A summary of avail-
able functions is provided in Table 1.
Using ZDSII to Download and Run ez80l92_demo_platform.pro
Use the following instructions to demonstrate code download and running the
demo project in the ZDSII debugger.
1. Connect the ZPAK II to the eZ80
®
Sales Demonstration Platform as described
in the eZ80
®
Sales Demonstration Platform Quick Start Guide (QS0024).
2. Launch ZDS II. ( Start menu
→
Programs
→
ZiLOG ZDS II–eZ80_<Version>
→
ZDS II–eZ80_<Version> ).
3. In ZDS II, select File
→
Open Project, and navigate to the following file path:
c:\Program Files\ZiLOG\ZDSII_ez80_<version>\applica-
tions\eZ80L92_Demo_Platform\src
4. Select the
ez80l92_demo_platform.pro
project and click Open. A list of
source files appears in the Workspace panel.
5. Select Project
→
Settings .
Table 1. eZ80
®
Sales Demonstration Platform Demo Features
Feature Description
Activate/Deactivate Real Time
Clock Demonstrates Real Time Clock control. Deactivating the Real
Time Clock removes the date and time display from the demon-
stration platform LCD screen.
Set Date Sets Real Time Clock date.
backlight - On/Off Toggles the demonstration platform LCD screen on and off.
Display Memory Displays the contents of a specified memory segment. Allows
the user the specify a starting address and number of bytes to
display.
Set Time Sets Real Time Clock time.
Write to LCD Allows the user to write up to four lines of 20 characters each to
the sales demonstration platform LCD display.
Decrease LED blink speed Slows the blink rate of the two LEDs on the demonstration plat-
form by 16ms each time the user presses the 2 or - key. Press-
ing switch SW2 on the demonstration platform has the same
effect.
Increase LED blink speed Increases the blink rate of the two LEDs on the demonstration
platform by 16ms each time the user presses the 3 or + key.
Pressing switch SW3 on the demonstration platform has the
same effect.