USER MANUAL - 9 - YF-68E/A0
OPERATION AND PANEL FUNCTION INSTRUCTION
1. Open the power switch of front panel, make the power switch is on “on” position .At this time indicator of power
switch is on .Screen will show the current volume.
2. Adjust the gas pressure to be adequate to machine, open the valve of pressed air.
3. Press the control knob of torch, electromagnetic valve is starting ,sound of HF arc-striking can be heard and burner
of torch should flow out gas (Burner of arc-supporting cutter should spurt fire )
4. It is 1mm from copper tip to work piece (it is further if it is arc-supporting cutter), press knob of torch and burn and
strike arc, sparks of HF arc-striking will diminished immediately .Welding machine can begin to cut.
Front Panel Instruction of I-PLAS25
Ⅱ
:
The panel picture above is for reference only. If any difference with the real machine, please follow with the real machine.
1
Current meter
2
Over-heat protect indicator
3
Over-current protect indicator
4
Current adjustment knob
5
Positive output terminal
6
Pilot arc output terminal
7
Torch switch socket
8
Gas-electricity output terminal
