12
ZIG-‐DA14 USER MANUAL
Note: To use WebOS EDID management make sure DIP 1 is ON (UP)
Active EDID table is shown. You can load one of the presets from the previous
page or load a custom EDID table from your PC
–
simply browse and upload the
custom EDID if required.
Admin/Firmware/Reset/Info
• Serial Number –
serial number of DA14-UHD
• Firmware –
Current firmware revision
• Hardware –
for internal use
• IP Address –
IP address of the unit assigned by your DHCP Server
• Hostname –
this is what you want to call the unit –
syntax example
CR100RX_k123. This is also the name you type into your browser to
access the WebOS. Don
’
t us spaces or special characters.
• Factory Reset –
will erase user entered date like installer notes.
• Choose File/Upload Firmware –
when necessary, this is where you select
a new firmware file and upload firmware.
• Reset DA14-UHD –
will reset the ZIG-DA14-UHD remotely.
• Install Update –
when necessary is for installing new software updates to
the unit.
Basic Setup/Use
This is a high bandwidth HDMI splitter that can handle 600MHz sources with
HDCP 2.2. You can use the dipswitch or WebOS to customize the settings,
however, for simple use:
1. Connect source to input of DA14-UHD (ex
–
Sony FMP-X10 Player)
2. Connect up to 4 displays to output ports 1-4 (up to 4K60RGB/4:4:4).
a. Note: If you are cascading - connect the output of port 4 to the input
port on the second DA14-UHD
–
you can do this up to 8 times.
3. Turn DA14-UHD on, then Displays, the Source. Default is to use the EDID
from port 1 display.
4. Enjoy UHD distributed video & audio.
