Matrix Switching System
—
User Manual
7
5.0 Front/Rear Panels
5.0.1 Front Panel
Figure 5-1 HX-88 Front Panel
The HX-88 Matrix Switching System supports up to 8 Output/Input switching keys on the
Front Panel allowing you to switch signals quickly.
Operation method No. 1:
“Output Channel
”
+
“
Input Channel
”
Click the Output button then click the Input button to set the combinations.
Operation method No. 2:
“STO or RCL
”
+
“
Output Channel
”
Click the STO or RCL button then click the Output button.
Operation method No. 3:
single operation
This example for EDID button, you can click the EDID button directly.
Operation method No. 4:
“STO and RCL
”
+
“
Input Channel
”
Click the STO and RCL button then click the Input button to set the combinations.
OUT1~8 keys
(output channel)
:
Indicate the Channel 1~Channel 8 for HDMI singal
output to peripheral display. You can also use these keys to adjust the status or access
the settings
IN1~8 keys
(input channel)
:
Indicate the Channel 1~Channel 8 for HDMI singal input.
You can use these keys to switch to the connection of the connected signal source
channels.
IR1:
Infrared receiver.
All:
This key allows you to set single input channel to all output channels.
-
Press the
“All”
key.
-
Select one of the IN 1~8 keys.
-
The selected
IN x
key will deliver the singal to all output channels.
-
You can also press
“All”
key and then the
“OFF”
key to disable all displays.
OFF:
Disable the entire output channels. Press one of the
OUT x
keys that you want to
disable.
