pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
11. Setup a Zigbee Network & Add Other Devices to the Network (No Coordinator Required)
AC Power
50/60Hz
Step 1
: Short press “Reset.”
button 4 times (Or re-power
on the device 4 times) to
enable the device to setup a
zigbee network (connected
light flashes twice) to
discover and add other
devices, 180 seconds
timeout, repeat the operation.
Zigbee
Remote
Step 2
: Set another device or remote or touch panel into network pairing mode and pair to the network, refer to
their manuals
.
Step 3
: Pair more devices and remotes to the network as you would like, refer to their manuals.
Step 4
: Bind the added devices and remotes through Touchlink so that the devices can be controlled by the
remotes, refer to their manuals.
< 10cm
TouchLink
10. Delete Learning to a Zigbee Green Power Remote
AC Power
50/60Hz
Step 1
: Short press “Reset.”
button 3 times (Or re-power
on the device 3 times) to start
delete Learning mode
(connected light flashes
slowly), 180 seconds timeout,
repeat the operation.
Zigbee
Green Power
Remote
Step 2:
Set the paired green
power remote into Learning
mode, please refer to its manual
.
Step 3
: Connected light will
flash 4 times to indicate
successful deleting.
Note: 1) Each added device can link and be controlled by max. 30 added remotes.
2) Each added remote can link and control max. 30 added devices.
12. OTA
The device supports firmware updating through OTA, and will acquire new firmware from zigbee controller or
hub every 10 minutes automatically.
Wiring Diagram
Live
Neutral
PUSH
(1)With Push
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
PUSH
Live
Neutral
PUSH LV
(2)With Push LV
Power Supply
N
L
V-
V+
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
